Fibre Reinforced Concrete Improvements and Innovations II 1st Edition by Pedro Serna, Aitor Llano Torre, José R Martí Vargas, Juan Navarro Gregori ISBN 9783030837181 3030837181

Fibre Reinforced Concrete Improvements and Innovations II 1st Edition by Pedro Serna, Aitor Llano Torre, José R Martí Vargas, Juan Navarro Gregori – Ebook PDF Instant Download/Delivery: 9783030837181 ,3030837181
Full download Fibre Reinforced Concrete Improvements and Innovations II 1st Edition after payment

Product details:

ISBN 10: 3030837181
ISBN 13: 9783030837181
Author: Pedro Serna, Aitor Llano Torre, José R Martí Vargas, Juan Navarro Gregori

Fibre Reinforced Concrete Improvements and Innovations II 1st Edition Table of contents:

1. Rheology and Early-Age Properties
2. Influence of Different Fibre Types on the Rheology of Strain Hardening Cementitious Composites
3. Using Fiber Reinforced Concrete to Control Early-Age Shrinkage in Replacement Concrete Pavement
4. Early Age Shrinkage Crack Distribution in Concrete Plates Reinforced with Different Steel Fibre Types
5. Technological Aspects
6. Influence of Synthetic Fibres on Seismic Resistance of Reinforced Concrete Sections
7. Development and Mechanical Characterization of Dry Fiber-reinforced Concrete for Prefabricated Prestressed Beams
8. Simulation of Fibre Orientation in Self-compacting Concrete: Case Studies
9. Mix Design and Properties of Self-compacting Fibrous Concrete
10. Aligned Interlayer Fibre Reinforcement for Digital Fabrication with Concrete
11. Mixture Proportioning of Steel Fibre Reinforced Self-compacting Concrete Based on the Compressible Packaging Method: Comparison with ACI 237R-07 and RILEM TC 174-SCC Recommendations
12. Evaluation the Yield and Ultimate Strain of FRC in Compression
13. Electromagnetic Shielding Characteristics of High Performance Fiber Reinforced Cementitious Composites
14. Mechanical Properties
15. The Manufacture of Fiber Cement Blocks Using Chemical and Thermomechanical Pulps and Rice Husk Ash
16. Post-Fire Flexural Tensile Strength of Macro Synthetic Fibre Reinforced Concrete
17. Experimental Investigation on the Cyclic Behaviour of Steel Fibre Reinforced Concrete Under Bending
18. Effect of Test Setups on the Shear Transfer Capacity Across Cracks in FRC
19. Bearable Local Stress of High-Strength SFRC
20. Impact Response of Different Classes of Fibre Reinforced Concrete
21. An Experimental Study on the Fatigue Failure Mechanisms of Pre–damaged Steel Fibre Reinforced Concrete at a Single Fibre Level
22. Development of an HPFRC for Use in Flat Slabs
23. Influence of the Steel Fibres on the Tension and Shear Resistance of Anchoring with Anchor Channels and Channel Bolts Cast in Concrete
24. Fiber Reinforced Concrete After Elevated Temperatures: Techniques of Characterization
25. Influence of the Curing Temperatures on the Mechanical Properties of Hemp Fibre-Reinforced Alkali-Activated Mortars
26. Equivalence Between Flexural Toughness and Energy Absorption Capacity of FRC
27. Alkali Resistant (AR) Glass Fibre Influence on Glass Fibre Reinforced Concrete (GRC) Flexural Properties
28. Fiber Reinforced Concrete Crack Opening Evaluation Using Digital Image Correlation Techniques
29. Effect of Distribution and Orientation of Fibers on the Post-cracking Behavior of Steel Fiber Reinforced Self-compacting Concrete in Small Thickness Elements
30. Ductility of the Four-Year-Old Steel Fibre Reinforced Concrete
31. Sensitivity of the Flexural Performance of Glass and Synthetic FRC to Fibre Dosage and Water/Cement Ratio
32. Bond Between Steel Reinforcement Bars and Fiber Reinforced Cement-Based Composites
33. An Experimental Study of the Influence of Moderate Temperatures on the Behavior of Macrosynthetic Fiber Reinforced Concrete
34. Post-cracking Behaviour of Glass Fibre Reinforced Concrete with Recycled Aggregates
35. Long-Term Properties
36. A Computational Sectional Approach for the Flexural Creep Behavior of Cracked FRC
37. Shrinkage of Steel-Fibre-Reinforced Lightweight Concrete
38. Time Dependent Deflection of FRC Members Under Sustained Axial and Flexural Loading
39. Influence of the Residual Tensile Strength on the Factor for Quasi-permanent Value of a Variable Action
40. Compressive and Tensile Creep and Shrinkage of Synthetic FRC: Experimental Results and Comparison to Codes
41. Creep in FRC – From Material Properties to Composite Behavior
42. Durability
43. Morphology of Corrosion of Metallic Fibers in Aggressive Media
44. Effects of Fibres on the Flexural Behaviour of Sound and Damaged RC Beams
45. Fiber Reinforced Concrete Elements Exposed to Accelerated Corrosion
46. Effect of Corroded Steel Fibers on Mechanical Behavior of Steel Fiber Reinforced Concrete
47. Self-healing of Fibre Reinforced Concrete Containing an Expansive Agent in Different Exposure Conditions
48. Characterisation of Strain-Hardening Cementitious Composite (SHCC) Under Cyclic Loading Conditions for Self-healing Applications
49. Corrosion Pattern and Mechanical Behaviour of Corroded Rebars in Cracked Plain and Fibre Reinforced Concrete
50. Evaluation of the Self-healing Capability of Ultra-High-Performance Fiber-Reinforced Concrete with Nano-Particles and Crystalline Admixtures by Means of Permeability
51. Analytical and Numerical Models
52. Material Characterisation for Nonlinear Finite Element Analysis (NLFEA)
53. Comparison Between the Cracking Process of Reinforced Concrete and Fibres Reinforced Concrete Railway Tracks by Using Non-linear Finite Elements Analysis
54. Experimental/Computational-Based Determination of Material Parameters for Nonlinear Simulation of UHPFRC
55. Mechanical Response of High Strength Fibre Reinforced Concrete Under Extreme Loads
56. Numerical Damage Modelling of Macro-synthetic Fibre Reinforced Concrete
57. Finite Element Analysis of Ultra High Performance Fibre Reinforced Concrete Beams Using Microplane Modelling
58. Machine Learning Prediction of Flexural Behavior of UHPFRC
59. Study of Dimensioning Aspects of FRC Based on the Beam Flexion Theory
60. Load-Carrying Capacity of SFRC Suspended Slabs with Different Support Conditions
61. Discrete Element Simulation of the Fresh State Steel Fiber Reinforced Self-compacting Concrete
62. Crack Width Simulation and Nonlinear Finite Element Analysis of Bursting and Spalling Stresses in Precast FRC Tunnel Segments Under TBM Thrust Jack Forces
63. Finite Element Modelling of UHPFRC Flexural-Reinforced Elements
64. Punching Shear Response of RC Slab-Column Connections Strengthened with UHPFRC – Finite Element Investigation
65. Numerical Evaluation the Effect of Specimen Thickness on Fibre Orientation in Self-consolidating Engineered Cementitious Composites
66. Numerical Modelling of Fiber-Reinforced Concrete Shear-Critical Beams
67. Experimental Analysis of Crack Development of an UHPC Wall Element Under Shear Loading
68. Assessment of the Shear Behaviour of Fibre Reinforced Concrete Through Numerical Modelling of Shear-Friction Theory
69. Modeling the Compressive Behavior of Steel Fiber Reinforced Concrete Under High Strain Rate Loads
70. Structural Design
71. Post-cracking Strength Classification of Macro-synthetic Fibre Reinforced Concrete for Sleeper Application
72. Structural Behaviour of Steel-Fibre-Reinforced Lightweight Concrete
73. Experimental Analysis of Beams Produced in Self-compacting Concrete Reinforced with Different Contents of Steel Fibres
74. Innovation in Durable Segments for CSO Tunnels
75. Incorporation of Rate-Dependent Fracture Properties in the Design of Precast Concrete Tunnel Segment with Hybrid Reinforcement
76. Codes and Standards
77. Developments and Standardisation of Flowable Concrete Reinforced with Fibres for Structural Design, Update of fib TG 4.3
78. Assesment of Codal Provision for SFRC Beam in Minimum Shear
79. Laboratory Investigations on the Installation of Fasteners in Fiber Reinforced Concrete
80. Quality Control
81. Applications of Statistical Process Control in the Evaluation of QC Test Data for Residual Strength of FRC Samples of Tunnel Lining Segments
82. Using Decades of Data to Rethink Proportioning and Optimisation of FRC Mixes: The OptiFRC Project
83. Case Studies: Structural and Industrial Applications
84. Fire Resistance of Steel Fibre Reinforced Concrete Elevated Suspended Slabs: ISO Fire Tests and Conclusions for Design
85. Structural Behavior of a Traditional Concrete and Hollow Tiles Mixed Floor Reinforced with HPFRC
86. Pedestrian Bridge over Las Vegas Avenue in Medellín. First Latin American Infrastructure in UHPFRC
87. First Experimental Full-Scale Elevated FRSCC Slab in South America
88. Masonry Walls Strengthened with Fiber Reinforced Concrete Subjected to Blast Load
89. Smart FRCs
90. Interfacial Bond Quality in Functionally Graded Concretes Incorporating Steel Fibres and Recycled Aggregates
91. Towards Rebar Substitution by Fibres – Tailored Supercritical Fibre Contents
92. A Constitutive Model for Steel-Fibre-Reinforced Lightweight Concrete
93. UV-C Treatment to Functionalize the Surfaces of Pet and PP Fibers for Use in Cementitious Composites. Adherence Evaluation
94. Potential of Using Recycled Carbon Fibers as Reinforcing Material for Fiber Concrete
95. Textile Reinforced Concrete (TRC)
96. Development of Textile Reinforced UHPC with Reduced Steel Fiber Contents
97. Reinforcement of Concrete with Glass Multifilament Yarns: Effect of the Impregnation on the Yarn Pull-Out Behaviour
98. Influence of Fibres Impregnation on the Tensile Response of Flax Textile Reinforced Mortar Composite Systems
99. Experimental Investigation of Mechanical Properties of Smart Textile Reinforced Concrete Pipes
100. UHPFRC, SHCC and ECC
101. Full-Scale Construction Test for Improvement of RC Void Slab Bridges Using UHPFRC – Part 1: Experimental Test Plan
102. Full-Scale Construction Test for Improvement of RC Void Slab Bridges Using UHPFRC – Part 2: Test Results
103. Influence of Fiber Type on the Tensile Behavior of High-Strength Strain-Hardening Cement-Based Composites (HS-SHCC) During and After Exposure to Elevated Temperatures
104. Tensile and Compressive Performance of High-Strength Engineered Cementitious Composites (ECC) with Seawater and Sea-Sand
105. Effect of Fiber Content Variation in Plastic Hinge Region of Reinforced UHPC Flexural Members
106. An Eco-Friendly UHPC for Structural Application: Tensile Mechanical Response
107. Characterization of Ultra High Performance Fiber Reinforced Concrete (UHPFRC) Tensile Behaviour
108. Slip-Hardening Bond: A Key to the Success of Ultra High Performance FRC Composites
109. Testing of Thin UHPFRC Cantilever Stairs with Bolted Connections
110. Studying of Processing-Structure-Properties Relation of Strain Hardening Cementitious Composites (SHCC)
111. The Effect of Fiber Content on the Post-cracking Tensile Stiffness Capacity of R-UHPFRC
112. Controlling Strength and Ductility of Strain-Hardening Cementitious Composites by Nano-Engineering
113. Comprehensive Characterization of UHPFRC Mixes for Seismic and Durability Rehabilitation of Bridge Piers
114. Evaluation of the Splitting Tensile Strength of Ultra-High Performance Concrete

People also search for Fibre Reinforced Concrete Improvements and Innovations II 1st Edition:

fiber reinforced concrete uses
    
fiber-reinforced concrete
    
fiber reinforced cement
    
fiber reinforced concrete association
    
fiber reinforcing concrete

Tags: Pedro Serna, Aitor Llano Torre, José R Martí Vargas, Juan Navarro Gregori, Fibre Reinforced, Innovations II