Third RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2022 1st Edition by Richard 9783030499167 3030499162

Third RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2022 1st Edition Richard Buswell – Ebook Instant Download/Delivery ISBN(s): 9783030499167, 3030499162

Product details:

• ISBN 10:3030499162
• ISBN 13:9783030499167
• Author:  Richard 

Second RILEM International  on Concrete and Digital Fabrication
Digital Concrete 2020
This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
This is a digital product.
Subjects
Technology & Engineering,
Materials Science
Standard VitalSource Return Policy
Easy 14-day returns whenthese requirementsare met. View all policies.Opens in new window

Table contents:

Front Matter
Mixture Design, Admixtures and Alternative Binder
An Fe-Rich Slag-Based Mortar for 3D Printing
Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating Admixture on Surface
Effect of Wollastonite Micro-Fiber Addition on Properties of 3D-Printable ‘Just-Add-Water’ Geopolymers
Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing
Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
Comparison of Printable Inorganic Binders – Key Properties for 3D Printable Materials
Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication
Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
Characterising Concrete Mixes for 3D Printing
Digital Fabrication of ‘Just-Add-Water’ Geopolymers: Effects of Curing Condition and Print-Time Interval
Advances in Binder-Jet 3D Printing of Non-cementitious Materials
Rubber-Cement Composites for Additive Manufacturing: Physical, Mechanical and Thermo-Acoustic Characterization
Properties of Composite Modified with Limestone Powder for 3D Concrete Printing
Effect of Limestone Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
Rheology Evaluation of Cement Paste with Nanoclays, Nanosilica and Polymeric Admixtures for Digital Fabrication
Geopolymer Formulation for Binder Jet 3D Printing
Lightweight Concrete 3D Printing by Selective Cement Activation – Investigation of Thermal Conductivity, Strength and Water Distribution
Rheology and Fresh State Behaviour
Numerical Model Describing the Early Age Behavior of 3D Printed Concrete – Work in Progress
Characterisation of the Layer Pressing Strategy for Concrete 3D Printing
A Compendious Rheo-Mechanical Test for Printability Assessment of 3D Printable Concrete
Effect of Metakaolin, Fly Ash and Polypropylene Fibres on Fresh and Rheological Properties of 3D Printing Based Cement Materials
“The Slug Test”: Inline Assessment of Yield Stress for Extrusion-Based Additive Manufacturing
Fresh and Hardened Properties of 3D-Printed Concrete Made with Dune Sand
An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications
Experimental Investigation on the Early Age Tensile Strength of Fiber Reinforced Mortar Used in 3D Concrete Printing
Transition from Fluid to Solid Concrete in the Flexible Mould Process
Physico-Chemical Characterization at Early-Age of 3D Printed Mortar
Gravity Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations
Investigation on Structural Build-Up of 3D Printable Foam Concrete
Effect of Cement Type and Limestone Powder Content on Extrudability of Lightweight Concrete
Numerical Modeling of an Extrusion-Based 3D Concrete Printing Process Considering a Spatially Varying Pseudo-Density Approach
Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste Intrusion
Effect of Vibration on the Rheology of Concrete for 3D Printing
Prediction of the Yield Stress of Printing Mortar Ink
Dynamic and Static Yield Stress Determination of Cementitious Paste with Admixtures
Penetration Study of Liquid in Powder Bed for 3D Powder-Bed Printing
Mechanical Performance
Quantitative Evaluation of Orientation of Steel Fibers in 3D-Printed Ultra-High Performance Concrete
Steel Fiber Links in 3D Printed Concrete
Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
Influence of Pumping/Extrusion on the Air-Void System of 3D Printed Concrete
Fire Behavior of a Printed Sample for Building
Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
Facilitating Ductile Failure of 3D Printed Concrete Elements in Fire
High-Performance Light-Weight Concrete for 3D Printing
Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
Dynamic Behaviour of Layered 3D Printed Concrete Elements
Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
3D Printing of Concrete: The Influence on Chloride Penetration
Effect of Heat Curing and E6-Glass Fibre Reinforcement Addition on Powder-Based 3DP Cement Mortar
Effect of Polypropylene Fibres on the Mechanical Properties of Extrudable Cementitious Material
Improving the Bonding Adhesion of the Cold Joints of Normal and Lightweight 3D Printing Mortars
Interlayer Effect on Fracture Behavior of 3D Printing Concrete
Auxetic Behavior of Cementitious Cellular Composites Under Uniaxial Compression and Cyclic Loading
Impact of Particle Size and Grading on Aggregate-Bed 3D Concrete Printing
Drying of 3D Printed Mortar Filaments at Early Age Assessed by X-Ray Computed Tomography
Structural Engineering and Reinforcement
Printed Concrete as Formwork Material: A Preliminary Study
Bond of Reinforcement Cable in 3D Printed Concrete
Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
Aligned Interlayer Fibre Reinforcement and Post-tensioning as a Reinforcement Strategy for Digital Fabrication
Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
Load Carrying Capacity and Failure Mode of 3D Printing Mortar Wall Panel Under Axial Compression Loading
Application of 3D Printed Segments Designed by Topology Optimization Analysis to a Practical Scale Prestressed Pedestrian Bridge
Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
Penetration Reinforcing Method for 3D Concrete Printing
Combining Multiple Loads in a Topology Optimization Framework for Digitally Fabricated Concrete Structures
Potential for the Integration of Continuous Fiber-Based Reinforcements in Digital Concrete Production
3D Concrete Printing on Site: A Novel Way of Building Houses?
Design Optimization for 3D Concrete Printing: Improving Structural and Thermal Performances
Flexural Behaviour of AR-Glass Textile Reinforced 3D Printed Concrete Beams
Digital design, Technologies and Industrialization
3D Concrete Printing – Free Form Geometries with Improved Ductility and Strength
Print-Cast Concrete: Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension: Analytical Modeling and Experimental Tests
Experimental Study on 3D Printing of Concrete with Overhangs
Inspection Methods for 3D Concrete Printing
DIGITAL CONSTRUCTION: 3D Printing for Performative Houses
Extended Lattice Model to Simulate the Printing Process of 3D Printed Cementitious Materials
Quality Assessment of Printable Strain Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
More Than Meets the Eye? Robotisation and Normativity in the Dutch Construction Industry
Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing: Experiments and Modelling
Automating Concrete Construction: Digital Design of Non-prismatic Reinforced Concrete Beams
Free Deposition Printing for Space Truss Structures
Rapid Composite Formwork: An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
Simultaneous Reinforcement of Concrete While 3D Printing
Additive Manufacturing by Extrusion of Lightweight Concrete – Strand Geometry, Nozzle Design and Layer Layout
Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC/SHCC)
Buildability of Geopolymer Concrete for 3D Printing with Microwave Heating
High-Resolution Additive Formwork for Building-Scale Concrete Panels
Architectural Applications and Workflows for Additive Fabrication with Concrete
ACDC: The Admixture Controlled Digital Casting and Its Application to Thin Folded Concrete Structures
Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
Reinforced Particle-Bed Printing by Combination of the Selective Paste Intrusion Method with Wire and Arc Additive Manufacturing – A First Feasibility Study
Knitting Concrete
Concrete 3D Printing: System Development, Process Planning and Experimental Results
Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
Sustainability, LCA and Economical Analyses
Environmental Impacts of 6-Axes Robotic Arm for 3D Concrete Printing
Preliminary Productivity Analysis of Conventional, Precast and 3D Printing Production Techniques for Concrete Columns with Simple Geometry
Preliminary Study of the Implications of 3D Printing on the Construction Supply Chain
Applications and Case Studies
Fast Complexity: Additive Manufacturing for Prefabricated Concrete Slabs
Architectonic Explorations of the Possibilities of 3D Concrete Printing: The Historic Building Fragment as Inspiration for New Applications with 3D Concrete Printing in Architecture
A Robust Mortar and Printing System
Design and Fabrication of a Non-standard, Structural Concrete Column Using Eggshell: Ultra-Thin, 3D Printed Formwork
Complex Architecture in Printed Concrete: The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality: A Real-Scale Demonstrator
UHPFRC Pavilion of 3-Dimentional Pentagon Tiling
Field Considerations for Deploying Additive Construction
Sustainable Reinforced Concrete Beams: Mechanical Optimisation and 3D-Printed Formwork
Thermal and Sound Insulation of Large-Scale 3D Extrusion Printing Wall Panel

People also search:

third rilem international conference

third rilem international conference on concrete and digital fabrication

third world conference

third international conference on small island developing states

third world in international relations